MILLING EFFICIENCY

Particles of the material are destroyed by the hammers impacts and friction on the inner surfaces of the crushing chamber, as well as self-grinding.

PRODUCT PARTICLE SIZE AJUSTMENT

There are 3 ways to adjust the particle size of the product:

• installation of grates with various openings;
• installation of various sets of hammers;
• connection of the dust collector.

EASY MAINTENANCE

Hinged covers provide quick access to the milling chamber for inspection and replacement of hammers and grates, and cleaning of the chamber.

OPERATIONAL SAFETY

The size and configuration of the loading hopper preclude access to the milling chamber.

A curtain in the hopper excludes the material ejection from the milling chamber. The end switch excludes start-up with open milling chamber. All rotating parts and assemblies are covered by the casing.

ABILITY TO COMPETE WITH VARIOUS HAMMERS

HC 5×2 Hammer crusher can be equipped with several types of hammers:

• 3 types of thickness — 6 mm, 8 mm, and 10 mm;
• 2 types of sharpening — flat, with symmetrical sharpening.

COMPATIBLE WITH DUST СOLLECTOR

 Ability to connect to dust collector to:

• increase the output;
• lower the temperature in the milling chamber;
• lower the content of dust fraction in the product;
• separate the material into three fractions: precipitated in the receiving container, cyclone and bag filter.

FREE SUSPENSION OF THE HAMMERS

Free suspension of the hammers on the rotor axes increases their resource and reduces the risk of mill damage due to the indestructible object entering the milling chamber.

QUALITY SPARE PARTS

The hammers are made of tool steel AISI 1066 and can be turned 180°. Self-aligning rotor bearings reduce the load on parts and assemblies. The grate is made of a standard perforated sheet or 5 mm AISI 1066 sheet laser cut openings.