Detail Produk
MILLING EFFICIENCY
Particles of the material are destroyed by the hammers impacts and friction on the inner surfaces of the crushing chamber, as well as self-grinding.
PRODUCT PARTICLE SIZE AJUSTMENT
There are 3 ways to adjust the particle size of the product:
- installation of grates with various openings;
- installation of various sets of hammers;
- connection of the dust collector.
EASY MAINTENANCE
Hinged covers provide quick access to the milling chamber for inspection and replacement of hammers and grates, and cleaning of the chamber.
OPERATIONAL SAFETY
The end switch excludes start-up with open milling chamber. The size and configuration of the loading hopper preclude access to the milling chamber. All rotating parts and assemblies are covered by the casing.
ABILITY TO COMPETE WITH VARIOUS HAMMERS
HC 5×5 Hammer crusher can be equipped with several types of hammers:
- 3 types of thickness — 6 mm, 8 mm, and 10 mm;
- 2 types of sharpening — flat, with symmetrical sharpening.
COMPATIBLE WITH DUST СOLLECTOR
Ability to connect to dust collector to:
- increase the output;
- lower the temperature in the milling chamber;
- lower the content of dust fraction in the product;
- separate the material into three fractions: precipitated in the receiving container, cyclone and bag filter.
FREE SUSPENSION OF THE HAMMERS
Free suspension of the hammers on the rotor axes increases their resource and reduces the risk of mill damage due to the indestructible object entering the milling chamber.
QUALITY SPARE PARTS
The hammers are made of tool steel AISI 1066 and can be turned 180°. Self-aligning rotor bearings reduce the load on parts and assemblies. The grate is made of a standard perforated sheet or 5 mm AISI 1066 sheet laser cut openings.
HAMMER CRUSHER
TYPE : HC 5X5
PARAMETRES | VALUES |
Loading door dimensions, mm | 300х498 |
Maximum initial material size, mm | 100 |
Mohs hardness of crushed material, up to | 5 |
Size of discharge grate openings, mm | 2-50 |
Comminuted product particle size when 0,8 mm grate is used | 90%<2 |
Maximum output, kg/hour | 1500 |
Electric motor power, kW | 22 |
50 Hz supply voltage, V | 380 |
Rotor rpm | 1500 |
Overall dimensions, mm (Length x Width x Height), mm | 1755х840х1185 |
Weight / Weight with control panel (kg) | 750/755 |
Hammers material – tool steel | AISI 1066 |
Control panel model | MCP |
* Depends on the physical properties of the material and the size of discharge grate openings