Detail Produk
CRUSHING EFFICIENCY
The «tooth- trough» jaws combination provides high crushing performance.
EASY MAINTENANCE
Quick-release attachment lug jf the axle for easy maintenance. Lubrication of moving parts through grease fittings. Easy adjustment of V-belt drive.
EASY LOADING
Latch lockable cover reduces dusting. Loading hopper configuration eliminates material ejection. An opening for connecting a dust extraction system is made in the rear of the hopper.
OPERATIONAL SAFETY
The end switch excludes start-up without a loading hopper. Emergency Stop Button for quick shutdown. All rotating parts and assemblies are covered by casings.
CONVENIENT ADJUSTMENT
Sawtooth threads (instead of metric) reduce the danger of jamming of the adjusting unit. A thread pitch of 3 mm allows to quickly change the gap between the jaws. The lock nut provides a reliable fixation of the gap.
COLLECTING CONTAINER
Possibility of completing with a feed-through funnel, a collecting bin of 10 liters and a support stand.
EASY CLEANING
The loading hopper is fixed on the housing with the latches. The casing has windows in the front and rear walls for cleaning the crusher. During operation, the windows are closed with hinged covers.
QUALITY SPARE PARTS
JC 6M jaw crusher can be equipped with tungsten carbide jaws, which significantly increases jaws resource and allows crushing harder materials.
COMPATIBILITY WITH ROTARY SAMPLE DIVIDER
Simultaneous crushing and reduction due to the combination of JC 6M Jaw Crusher and RSD Rotary sample divider in a single technological complex. Aggregation eliminates the stage of sample overload, which reduces dusting and increases work productivity.
SET OF TRAYS
Rotary sample divider is equipped with trays of different sizes:
- 25% of the sample;
- 10% of the sample;
- 5% of the sample;
- a tray with a partition that provides smooth adjustment of the degree of reduction from 10% to 1% of the total sample volume.
JAW CRUSHER
TYPE : JC-6M
PARAMETERS | VALUES |
Loading door dimensions, mm | 60х100 |
Maximum initial material grain size, mm | 50 |
Mohs hardness of crushed material, up to | 8 |
Discharge slot adjustment range, mm | 2-15 |
Average product particle size at minimum gap, mm | 90%<2 |
Maximum output, kg/hour | 200 |
Electric motor power, kW | 1,1 |
50 Hz supply voltage, V | 380 |
Collecting container volume, L | 1,9 |
Overall dimensions (Length x Width x Height / Height with support stand) (mm) | 645х340х610/ 1100 |
Weight / Weight with control panel (kg) | 140/175 |
Jaw material – iron / steel | GJN-HV600 (XCr14) / UNS J91109/ WC |
Compartible control panel | MCP3-02 |
* Depends on the hardness of the material and the discharge slot setting.
** When using jaws made of tungsten carbide.