Detail Produk
CRUSHING EFFICIENCY
The «tooth- trough» jaws combination provides high crushing performance.
EASY MAINTENANCE
A quick-detachable loading hopper and a process opening in the housing make it easy to clean the crusher.
OPERATIONAL SAFETY
All rotating parts and assemblies are covered by the casing. The lid of the loading hopper excludes the material ejection from the crushing chamber.
LABORATORY APPLICATION
Due to its small size and weight, JC 6 is suitable for use in laboratories.
CONVENIENT ADJUSTMENT
Sawtooth threads (instead of metric) reduce the danger of jamming of the adjusting unit. A thread pitch of 3 mm allows to quickly change the gap between the jaws. The lock nut provides a reliable fixation of the gap.
COLLECTING CONTAINER
Possibility of completing with a collecting container of 10 liters.
QUALITY SPARE PARTS
The moving and fixed jaws of JC 6 are interchangeable. Lining armor made of wear-resistant steel. JC 6 jaw crusher can also be equipped with tungsten carbide jaws, which significantly increase jaws resource and allow to crush harder materials.
COMPATIBILITY WITH ROTARY SAMPLE DIVIDER
Simultaneous crushing and reduction due to the combination of JC 6 Jaw Crusher and RSD Rotary sample divider in a single technological complex. Aggregation eliminates the stage of sample overload, which reduces dusting and increases work productivity.
SET OF TRAYS
Rotary sample divider is equipped with trays of different sizes:
- 3 trays for ¼ of the sample;
- 1 tray for ⅛ of the sample;
- a tray with a partition that provides smooth adjustment of the degree of reduction from ⅛ to 1/80 of the total sample volume.
Rotary sample divider can be equipped with trays of other sizes upon special order.
JAW CRUSHER
TYPE : JC-6
PARAMETERS | VALUES |
Loading door dimensions, mm | 60х100 |
Maximum initial material grain size, mm* | 50 |
Mohs hardness of crushed material, up to | 8** |
Discharge slot adjustment range, mm | 2-15 |
Average product particle size at minimum gap, mm | 90%<2 |
Maximum output, kg/hour | 200 |
Electric motor power, kW | 1,1 |
50 Hz supply voltage, V | 380 |
Collecting container volume, L | 1,6 |
Overall dimensions (Length x Width x Height / Height with support stand) (mm) | 640х340х600 / 1090 |
Weight / Weight with control panel (kg) | 130/ 165 |
Jaw material – iron / steel | GJN-HV600 (XCr14) / UNS J91109/ WC |
Compartible control panel | MCP3-02 |
** When using jaws made of tungsten carbide.